> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/65r-sensor-user-guide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/65r-sensor-user-guide/65r-sensor/configuration-and-settings/how-to-access-web-user-interface/accessing-the-web-user-interface-on-the-inspired-flight-hand-controller.md).

# Accessing the Web User Interface on The Inspired Flight Hand Controller

The Web User Interface for the 65R Sensor can be reach via the Inspired Flight Hand Controller. The Web User Interface can be used to check the status, change settings and manually trigger the sensor.

{% stepper %}
{% step %}

### Power on Drone and Hand Controller 

{% endstep %}

{% step %}

### Navigate to the Home Page on your Hand Controller

<figure><img src="https://3675182560-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXxc0lOfDa92aCfFa5lb4%2Fuploads%2FewA6qk4LFm7SYvo1ed6r%2FOptimus%208_28_2025%203_35_03%20PM.png?alt=media&amp;token=1b0da651-b6e5-469d-8ed4-f263b2e8d6d5" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Open the Application Menu

Click the grid icon in the lower right hand corner to open the Application Menu.

<figure><img src="https://3675182560-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXxc0lOfDa92aCfFa5lb4%2Fuploads%2FPpQI4uetLEwY9dsXyaue%2FOptimus%208_28_2025%203_35_33%20PM.png?alt=media&amp;token=76c2dcfb-71cc-4e0b-bb24-a45541ec8aea" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

#### Open the Web Browser Application

Click the WebView Browser to open a webpage.

<figure><img src="https://3675182560-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXxc0lOfDa92aCfFa5lb4%2Fuploads%2FundgwSMBW4SAgZT4smBX%2FOptimus%208_28_2025%203_35_45%20PM.png?alt=media&amp;token=70d71e91-bd50-49c6-a0ce-1494fdbb6d6e" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Enter The Sensor's IP Address in the browser

To navigate to the Web User Interface, enter the IP address listed below, then press the arrow icon.&#x20;

```
192.168.144.141
```

<figure><img src="https://3675182560-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXxc0lOfDa92aCfFa5lb4%2Fuploads%2F8UtZGFYABgyBffyDduso%2FOptimus%208_28_2025%203_42_44%20PM.png?alt=media&amp;token=2f504213-8404-4878-a9fc-1a4c3b7eccfb" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Web User Interface

From the home page you can check the status of the sensor, manually capture images, or navigate to other pages from the left hand side bar.

<figure><img src="https://3675182560-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXxc0lOfDa92aCfFa5lb4%2Fuploads%2FjvFdieIzHR3wxMwFtzrU%2FOptimus%208_28_2025%203_41_02%20PM.png?alt=media&amp;token=76e3c221-9198-41f6-815e-ca58135d5c24" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}