> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/65r-sensor-user-guide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/65r-sensor-user-guide/65r-sensor/installation/dji/dji-m300-and-m350.md).

# DJI M300 & M350

## Instructions

1. Align the white dot on the gimbal connector with the red dot on the drone connector.&#x20;
2. The turn until the red dot on the gimbal connector and drone connector align.&#x20;
3. Power on aircraft.&#x20;

<figure><img src="https://3675182560-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXxc0lOfDa92aCfFa5lb4%2Fuploads%2FEo4BcPmdz1TaEJdOjEoq%2FM300%20install%20%E2%80%91%20Made%20with%20FlexClip.gif?alt=media&amp;token=145ed415-4537-4547-8b30-2d59c849efad" alt=""><figcaption></figcaption></figure>

***

## Dual Gimbal Setup&#x20;

For dual gimbal mount setup the 65R should be placed in the correct port for the selected mode of operation (sensor configuration).

### Integrated Mode&#x20;

Use gimbal slot 1. This will power the sensor/gimbal/light sensor, and allow the sensor to communicate with the DJI autopilot and ingest trigger commands, GPS, altitude, and attitude information.

<figure><img src="https://3675182560-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXxc0lOfDa92aCfFa5lb4%2Fuploads%2F3YALimoFTT7MBmODALVO%2Fimage.png?alt=media&amp;token=7f458afd-d6e2-4628-a023-194f6d1c1140" alt=""><figcaption></figcaption></figure>

***

## Compatibility

Please see the page linked below for skyport compatibility information, such as supported skyport firmware versions.&#x20;

{% content-ref url="/pages/LD1MjuCvALh8ImI6D5O3" %}
[DJI Skyport](/65r-sensor-user-guide/integration-information/communication-protocol/dji-skyport.md)
{% endcontent-ref %}

***

## Adding to DJI Pilot

{% content-ref url="/pages/t9BJdrqZcPkVGJbRp83f" %}
[Adding 65R to DJI Pilot](/65r-sensor-user-guide/integration-information/communication-protocol/dji-skyport/adding-65r-to-dji-pilot.md)
{% endcontent-ref %}

***
