Sentera Sensors & DronesPurchase 65R65R Product Page

Video Streaming Setup

Getting Started

Video Streaming requires IGC v1.3 or greater.

IGC v1.3 and greater has automatic payload detection, parameter application, and video stream settings for 65R. When prompted please apply the payload parameters via IGC.

Video Streaming Parameters

Parameter
Value

Stream 2

SENTERA

Low Latency Mode

Enabled

Video Streaming Setup Instructions

1

Check!

These setup instructions are only necessary if the payload detection is not working, or if the settings are accidentally changed.

Video streaming is not supported on IGC v1.2.5 or earlier.

2

Install 65R

LogoIF800 Tomcat | 65R Sensor User Guidesupport.senterasensors.com
LogoIF1200 | 65R Sensor User Guidesupport.senterasensors.com
3

Power On the Aircraft and Hand Controller

Power the aircraft and hand controller on..

4

Open IGC

Open IGC and verify the aircraft and hand controller are connected to each other.

5

Open the Settings Menu

Press the IFT Logo in the upper left hand corner to open the menu.

6

Select Application Settings

7

Scroll to Video Settings

8

Select Stream 2

Select the drop down menu and select SENTERA

9

Enable Low Latency Mode

10

Return to Fly Screen

11

Press the On Screen Video Stream Button to Change to Stream 2

Tap the "1" box on the right hand side of the screen to switch to the secondary video stream.

The video stream for the 65R will now be displayed in the video window.

PreviousParameter SetupNextOperation

Last updated

Was this helpful?