> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/65r-sensor-user-guide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/65r-sensor-user-guide/integration-information/gimbal-connectors/dji-xt30.md).

# DJI XT30

Sentera offers a kit for mounting 65R with a DJI XT30 connector for use with 6X gimbals with Skyport mounting hardware.

The input voltage range is 12-16VDC and the typical power draw is 20 watts.

{% hint style="info" %}
This mounting method only supports powering the 65R, gimbal, and external GPS. Triggering must be accomplished via stand alone mode.
{% endhint %}

<table data-card-size="large" data-view="cards"><thead><tr><th></th><th></th></tr></thead><tbody><tr><td><img src="https://3675182560-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXxc0lOfDa92aCfFa5lb4%2Fuploads%2FFM5iLU8uJDDYtTZ4vBPs%2Fimage.png?alt=media&amp;token=98538780-8fcc-46ef-b4da-1f08bdd5519f" alt="" data-size="original"></td><td>XT30 Mounting Kit</td></tr><tr><td><img src="https://3675182560-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXxc0lOfDa92aCfFa5lb4%2Fuploads%2FTc0UodcQo84lTPhueQnY%2Fimage.png?alt=media&amp;token=300a386c-1ecb-4b97-8981-9b2fe2d872a4" alt="" data-size="original"></td><td>65R Skyport V2</td></tr></tbody></table>

***

## Kit Contents

SKU: 21229-00

* Gimbal Interconnect
* Vibration Dampeners
* Power Cable

***

## Sentera XT30 Mounting Plate

The kit can be attached to the air vehicle using the mounting hole pattern shown.

<figure><img src="https://3675182560-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXxc0lOfDa92aCfFa5lb4%2Fuploads%2FSgEfmggKeZTAIJKltAUu%2Fimage.png?alt=media&amp;token=565cc3f2-510f-4c8f-99f4-7a054154fb48" alt=""><figcaption></figcaption></figure>

***