Gremsy HDMI Hyper Quick
Last updated
Last updated
The 65R gimbal with the HDMI Hyper Quick mounting configuration can be used with the Gremsy Hyper Quick receiver.
Gremsy HDMI Hyper Quick Receiver
65R Gremsy Hyper Quick
For HDMI Hyper Quick configurations the serial lines are connected the TX2/RX2 lines on the Gremsy receiver.
Pin | Signal |
---|---|
2 | TX2 |
3 | RX2 |
6 | GND |
The ethernet lines from the gimbal are connected to AUX S1, S2, S3, S4 on the Gremsy receiver. AUX S5 is connected to PPS.
Pin | Signal |
---|---|
5 | PPS |
6 | RX_N |
7 | RX_P |
8 | TX_N |
9 | TX_P |