Required

Optional

Getting Started

The 65R stores the imagery on an internal solid state hard drive that is not removable from the sensor. Use the process outline below to access the collected data.

Power On Sensor

Power the 65R using the AC adapter or keep it attached to the aircraft and turn the aircraft on.

Then wait for the LEDS on the sensor to do the following:

This verifies that the sensor is fully booted and ready for data offload.

Connect USB Cable to Sensor and Computer

Connect the sensor to the computer using a USB cable.

Open a Finder Window

Once the 65R is fully booted it will appear as a network location in the left hand menu of the Finder window.

Select Data Folder

Select Snapshots Folder

Select Session Folder

Session folders are the folders where the imagery is stored for each flight.

Copy Folder

Eject Sensor

Getting Started

Use the following pages to learn about what equipment is needed to offload data from the 65R, how to offload the data, and how to import the data into post processing software.

Equipment

Offload Process

Data Import

If you are trying to offload data and are running into issue's to where its asking for a pin number instead of username and password and are running on a domain controlled account, see image below. Please go through the following steps below.

Steps to resolve issue:

1. Press windows button + L on your keyboard on your laptop or desktop computer. This will then go to the lock screen.

2. Click on "sign-in options" button underneath the pin, see image below.

1. Select password, i.e., there should be an icon that looks like a key, select the key button and then type in the windows password to get into the computer.

2. Go through the data offload process again, this time it should work. see link to page below.

Introduction

65R uses standard metadata tagging formats and labels, such as EXIF and XMP. They are compatible with standard GIS and image processing tools, such as Pix4D.

Common Post Processing Tools

Getting Started

The 65R stores the imagery on an internal solid state hard drive that is not removable from the sensor. Use the process outline below to access the collected data.

Power On Sensor

Power the 65R using the AC adapter or keep it attached to the aircraft and turn the aircraft on.

Then wait for the LEDS on the sensor to do the following:

This verifies that the sensor is fully booted and ready for data offload.

Connect USB Cable to Sensor and Computer

Connect the sensor to the computer using a USB cable.

Verify Connection

Open your wifi/network panel from the task bar. Verify that you see "unidentified network - No internet". This is the 65R appearing as a network device.

Open a File Browser Window

Navigate to Sensor Storage

Navigate to the 65R internal storage by typing \\192.168.42.1 into the address bar of the file browser and pressing enter.

Login to Sensor

Windows will display a network credentials pop-up. The user name is sentera and there is no password. Press OK.

Select Data Folder

Select Snapshots Folder

Select Session Folder

Session folders are the folders where the imagery is stored for each flight.

Copy Folder

Introduction

The 65R uses an internal SSD to store the captured data. This article will describe the file storage structure.

File Structure

The 65R file structure is as follows:

data > snapshots > session folders > rgb > image files

The session folders are labeled as YYYY-MM-DD_HH-MM-SS. Where YYYY-MM-DD is the date that the imagery was collected on, and HH-MM-SS is the UTC time that the session folder created at (when the 6X status lights turned green).

Inside of each session folder is a sub folder labeled rgb. This folder contains the the imagery.