About

In this mode the 65R ingests triggering commands and GPS/Altitude/Attitude from the drone to capture and geotag imagery.

Default Configuration

For use with the PHX see the 65R PHX Payload User Guide:

Operational Modes

The 65R can operate in two different modes. Each of these modes has a slightly different Standard Operating Procedure.

Integrated Mode

In this mode the 65R ingests triggering commands and GPS/Altitude/Attitude from the drone to capture and geotag imagery. This is the most common operational mode.

Support Aircraft:

• DJI M300/M350

• DJI M200/210

• Freefly Astro

• IF800 & IF1200

Stand Alone Mode (Sentera GPS)

In this mode the 65R uses GPS data from the light sensor/GPS module to determine when it should trigger the camera.

Notes

General Instructions

1. Assemble aircraft.

2. Install the 65R.

3. Power the aircraft.

4. Verify a session has started.

5. Verify camera model, altitude, overlap , and flight speed settings in flight app.

6. Fly.

7. Offload data (optional).

Detailed Instructions

Assemble Aircraft

Assembly the aircraft per manufacturer instructions.

Attach 65R

Attach the 65R to the aircraft.

Power Aircraft & Wait for Session Start

1. Power the aircraft on.

2. Let the 65R boot (solid status red LEDs).

3. Verify the 65R has started a session (solid green status LEDs). This takes about 1 minute and requires a GPS fix.

Verify Flight Settings

Verify the camera model/parameters, flight speed, survey altitude, and overlap settings.

Fly

Prepare the aircraft for launch, then fly.

Offload Data (optional)