> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/65r-sensor-user-guide/65r-sensor/configuration-and-settings/image-adjustment/how-to-change-image-settings.md).

# How To Change Image Settings

## Navigate to Image Adjustment Page

<figure><img src="/files/8rKxWCS7gH5j5d61mzw2" alt=""><figcaption></figcaption></figure>

{% content-ref url="/pages/8YiTG9euURv1IzhSXz9Q" %}
[How To Access Web User Interface](/home/65r-sensor-user-guide/65r-sensor/configuration-and-settings/how-to-access-web-user-interface.md)
{% endcontent-ref %}

## Set Desired Values

The settings on this page can be applied while a session is currently running and no reboot of the camera is needed. &#x20;

<figure><img src="/files/pkTpnLAAq5MCNAJ8hqkg" alt=""><figcaption></figcaption></figure>

## Press Apply

After modifying one or more values, click the ‘Apply’ button in the lower right corner of the page.  The settings will be updated for the next trigger.

<figure><img src="/files/prZvDUiTMCK2yH0zaqkC" alt=""><figcaption></figcaption></figure>

## Test Image (optional)

If a session is currently running, the ‘Capture Image’ button will be enabled on this page to allow more rapid testing of settings changes.  Sessions can be started from the \`Home\` page if one isn’t currently running.

<figure><img src="/files/qEWJGU6hiHcrYfzDDg9k" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
Large changes to auto-exposure will apply right away, but the camera may take 10+ seconds to stabilize on the new exposure settings. Other settings changes are reflected in the images much quicker.
{% endhint %}