> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/65r-sensor-user-guide/65r-sensor/data-offload/offload-process.md).

# Offload Process

## Getting Started

The 65R stores the imagery on an internal solid state hard drive that is not removable from the sensor. Use the process outline below to access the collected data. 

{% hint style="warning" %}
Imagery is NOT stored on the micro SD card. 
{% endhint %}

## Instructions

{% stepper %}
{% step %}

### Power On Sensor

Power the 65R using the AC adapter or keep it attached to the aircraft and turn the aircraft on. 

Then wait for the LEDS on the sensor to do the following:

<table><thead><tr><th width="217">Power Method</th><th>LED Behavior</th></tr></thead><tbody><tr><td>AC Power Adapter</td><td>Flashing Red</td></tr><tr><td>Drone Power</td><td>Solid Green (Requires GPS Fix)<br>Solid Red (After 2 minutes w/o GPS) </td></tr></tbody></table>

This verifies that the sensor is fully booted and ready for data offload.

<div data-with-frame="true"><figure><img src="/files/TTKuIukgKxPMjqlGSer7" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}

### Connect USB Cable to Sensor and Computer

Connect the sensor to the computer using a USB cable.

{% hint style="info" %}
Use the USB-C port on the sensor not the USB-C port on the top of the gimbal.
{% endhint %}

{% hint style="warning" %}
Use the [USB-C Cable provided with the 65R](https://www.amazon.com/Anker-Powerline-Pull-up-Resistor-MacBook/dp/B01MZIPYPY?th=1). This cable gives the best and most reliable performance.&#x20;
{% endhint %}

<div data-with-frame="true"><figure><img src="/files/wp68gll1bjN0ukmBGSzE" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}

### Open a File Browser Window

<div data-with-frame="true"><figure><img src="/files/2JPd7lhPN31oci6MtcHl" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}

### Navigate to Sensor Storage

Navigate to the 65R internal storage by typing \\\192.168.42.1 into the address bar of the file browser and pressing enter.&#x20;

```
\\192.168.42.1
```

{% hint style="info" %}
Backslashes are required to navigate to the sensor internal storage. Ensure that you type \\\ before the sensor IP address.
{% endhint %}

{% hint style="info" %}
The sensor may need a minute to fully boot before it can be accessed via the file browser.
{% endhint %}

<div data-with-frame="true"><figure><img src="/files/Sfem38os2DmAm8I4zkBm" alt=""><figcaption></figcaption></figure></div>

{% hint style="info" %}
If the 65R can't be connected to after a few minutes try the following:\
\- Turn off/disconnect any Wi-Fi or Ethernet connections that have internet access.\
\- Verify the USB cable being used is the provided cable or one of the listed [compatible cables](https://sentera.gitbook.io/65r-sensor-user-guide/65r-sensor/whats-in-the-box/replacement-cables)
{% endhint %}

{% hint style="info" %}
Adding this file path to Quick Access can be helpful for repeated use.&#x20;
{% endhint %}
{% endstep %}

{% step %}

### Login to Sensor

Windows will display a network credentials pop-up. The user name is sentera and there is no password. Press OK.&#x20;

<div data-with-frame="true"><figure><img src="/files/8wnVWNxeQoSY1eCUXrEQ" alt=""><figcaption></figcaption></figure></div>

{% hint style="info" %}
If your user account is controlled by a domain .\sentera may need to be used as the username. If this does not work please see link below on how to resolve issue.
{% endhint %}

{% content-ref url="/pages/OoFUzpC3mF33OuWfL3Ia" %}
[Connecting With Domain Controlled Accounts](/home/65r-sensor-user-guide/65r-sensor/data-offload/offload-process/connecting-with-domain-controlled-accounts.md)
{% endcontent-ref %}
{% endstep %}

{% step %}

### Select Data Folder

<div data-with-frame="true"><figure><img src="/files/YT7mYlZXsFU8wJxHZ6Ye" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}

### Select Snapshots Folder

<div data-with-frame="true"><figure><img src="/files/7vArNvMKnoHUu6o6rDBL" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}

### Select Session Folder

Session folders are the folders where the imagery is stored for each flight.&#x20;

<div data-with-frame="true"><figure><img src="/files/Kx73nJa1jbxGcFQY5dFG" alt=""><figcaption></figcaption></figure></div>

{% hint style="info" %}
If the 65R is not power cycled between flights that are intended to be separate (i.e. not a battery swap) all of the photos from both flights will be stored in the same session folder.&#x20;
{% endhint %}
{% endstep %}

{% step %}

### Copy Folder

{% hint style="warning" %}
Ensure that you always copy-paste (ctrl+C) and not cut-paste (ctrl+X). Using cut-paste can lead to data loss that cannot be undone.
{% endhint %}

<div data-with-frame="true"><figure><img src="/files/jdFQmePIIjGuVo3KKpXI" alt=""><figcaption></figcaption></figure></div>
{% endstep %}
{% endstepper %}