> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/65r-sensor-user-guide/65r-sensor/installation/inspired-flight/inspired-flight-compatibility-settings/video-streaming-setup.md).

# Video Streaming Setup

## Getting Started

{% hint style="danger" %}
Video Streaming requires IGC v1.3 or greater. 
{% endhint %}

IGC v1.3 and greater has automatic payload detection, parameter application, and video stream settings for 65R. When prompted please apply the payload parameters via IGC. 

## Video Streaming Parameters <a href="#video-streaming" id="video-streaming"></a>

| Parameter        | Value   |
| ---------------- | ------- |
| Stream 2         | SENTERA |
| Low Latency Mode | Enabled |

## Video Streaming Setup Instructions

{% stepper %}
{% step %}

### Check!

These setup instructions are only necessary if the payload detection is not working, or if the settings are accidentally changed.&#x20;

Video streaming is not supported on IGC v1.2.5 or earlier.&#x20;
{% endstep %}

{% step %}

### Install 65R&#x20;

{% content-ref url="/pages/LeaZm0e5Q2Smbe5yjI0I" %}
[IF800 Tomcat](/home/65r-sensor-user-guide/65r-sensor/installation/inspired-flight/if800-tomcat.md)
{% endcontent-ref %}

{% content-ref url="/pages/GplavTIwYGre63kgkjVV" %}
[IF1200](/home/65r-sensor-user-guide/65r-sensor/installation/inspired-flight/if1200.md)
{% endcontent-ref %}
{% endstep %}

{% step %}

### Power On the Aircraft and Hand Controller

Power the aircraft and hand controller on..
{% endstep %}

{% step %}

### Open IGC

Open IGC and verify the aircraft and hand controller are connected to each other.

<figure><img src="/files/2UbfqOABRIoIagkSg8QX" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Open the Settings Menu

Press the IFT Logo in the upper left hand corner to open the menu.

<figure><img src="/files/EeybRATHVrZWCmY6xB7U" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Select Application Settings

<figure><img src="/files/gxRzaENftu9799OvhEoi" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/1XPjsfjJpmTAryfGu9Gs" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Scroll to Video Settings

<figure><img src="/files/rGMzfUbA87pGZlDsPjDG" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Select Stream 2

Select the drop down menu and select SENTERA&#x20;

<figure><img src="/files/cMO4GD6lepa7b5OejGzq" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Enable Low Latency Mode

<figure><img src="/files/vNHOyQEcLFqnGTD7Nmd6" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Return to Fly Screen

<figure><img src="/files/PXmrH6TzMOtZL86rfSpz" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Press the On Screen Video Stream Button to Change to Stream 2

Tap the "1" box on the right hand side of the screen to switch to the secondary video stream.&#x20;

The video stream for the 65R will now be displayed in the video window.&#x20;

<figure><img src="/files/PYLuscT4jrplwESgzKG4" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/7Zx9BG7lQkbbOit6luMh" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}