> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/65r-sensor-user-guide/65r-sensor/operation/standard-operating-procedure/integrated-mode.md).

# Integrated Mode

## General Instructions

<figure><img src="/files/xiYcZLinMMF3X48zhlOn" alt=""><figcaption></figcaption></figure>

1. Assemble aircraft.
2. Install the 65R.
3. Power the aircraft.
4. Verify a session has started.&#x20;
5. Verify camera model, altitude, overlap , and flight speed settings in flight app.&#x20;
6. Fly.
7. Offload data (optional).

***

## Detailed Instructions

### Assemble Aircraft

Assembly the aircraft per manufacturer instructions.&#x20;

<figure><img src="/files/DGkl397APXLpvpSMBa9o" alt=""><figcaption></figcaption></figure>

### Attach 65R

Attach the 65R to the aircraft.&#x20;

<figure><img src="/files/0ty7XJBbLYEkejHmS7Vc" alt=""><figcaption></figcaption></figure>

### Power Aircraft & Wait for Session Start

1. Power the aircraft on.&#x20;
2. Let the 65R boot (solid status red LEDs).
3. Verify the 65R has started a session (solid green status LEDs). This takes about 1 minute and requires a GPS fix.

<figure><img src="/files/aU5RwXCu1SvGN8PnZI4F" alt=""><figcaption></figcaption></figure>

### Verify Flight Settings

Verify the camera model/parameters, flight speed, survey altitude, and overlap settings.

<figure><img src="/files/EL7i8mryn45V5i8YlN99" alt=""><figcaption></figcaption></figure>

### Fly

Prepare the aircraft for launch, then fly.&#x20;

<figure><img src="/files/isHYF0ju5Po2qvhn4gy4" alt=""><figcaption></figcaption></figure>

### Offload Data (optional)

{% content-ref url="/pages/9vf5pmISGFZAE0A2xE0a" %}
[Data Offload](/home/65r-sensor-user-guide/65r-sensor/data-offload.md)
{% endcontent-ref %}