> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/65r-sensor-user-guide/integration-information/gimbal-connectors/dji-xt30.md).

# DJI XT30

Sentera offers a kit for mounting 65R with a DJI XT30 connector for use with 6X gimbals with Skyport mounting hardware.

The input voltage range is 12-16VDC and the typical power draw is 20 watts.

{% hint style="info" %}
This mounting method only supports powering the 65R, gimbal, and external GPS. Triggering must be accomplished via stand alone mode.
{% endhint %}

<table data-card-size="large" data-view="cards"><thead><tr><th></th><th></th></tr></thead><tbody><tr><td><img src="/files/za1UUmQGiI5rYm7FOGIQ" alt="" data-size="original"></td><td>XT30 Mounting Kit  </td></tr><tr><td><img src="/files/UGLKPoqigxmTIBIyqcQb" alt="" data-size="original"></td><td>65R Skyport V2  </td></tr></tbody></table>

***

## Kit Contents

SKU: 21229-00

* Gimbal Interconnect
* Vibration Dampeners
* Power Cable

***

## Sentera XT30 Mounting Plate

The kit can be attached to the air vehicle using the mounting hole pattern shown.

<figure><img src="/files/uBmD0VTYXVRhgobL4txu" alt=""><figcaption></figcaption></figure>

***