# How To Change Overlap Settings

## Navigate to Configuration Page

<figure><img src="/files/zBOiPLB0JzxwvfOD3dW3" alt=""><figcaption></figcaption></figure>

{% content-ref url="/pages/0bbZSnceWc7yVqvuz8Hz" %}
[How To Access Web Page User Interface](/home/6x-series-sensors-user-guide/6x-series-sensors/configuration-and-settings/how-to-access-web-page-user-interface.md)
{% endcontent-ref %}

## Locate Trigger Field and Select Overlap

<figure><img src="/files/eV7rMuDBgfGKlqmrTtle" alt=""><figcaption></figcaption></figure>

## Set Overlap

<figure><img src="/files/7rH5MxqRjcqbZOEzcWMH" alt=""><figcaption></figcaption></figure>

Click and drag the dot to adjust the overlap value.

## Press Apply and Restart

<figure><img src="/files/zSuDMu6W7usGY9S8vBKB" alt=""><figcaption></figcaption></figure>

## Wait For Sensor to Reconnect

<figure><img src="/files/N2inaIGVCqzs1MWJbEiT" alt=""><figcaption></figcaption></figure>

## Verify Correct Overlap is Shown

<figure><img src="/files/i9NSLdxT98b0ysCPlqeI" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://support.senterasensors.com/home/6x-series-sensors-user-guide/6x-series-sensors/configuration-and-settings/configuration/how-to-change-overlap-settings.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.