> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/6x-series-sensors-user-guide/6x-series-sensors/configuration-and-settings/home.md). # Home 6X Series Sensors Web Page UI Home ## Introduction The home page of the 6X webpage displays the sensor status, session control, trigger control, and calibration control menus. This is the default landing page when the webpage is accessed.

*** ## Status The status field displays the telemetry information received from external sources like the aircraft autopilot or light sensor/GPS.

### GPS Status The GPS status displays the GPS information currently available to the 6X.

Item	Information
Latitude	latitude location in decimal degrees.
Longitude	Longitude location in decimal degrees.
Alt	Current altitude in meters (AMSL)
GPS Time	The Coordinated Universal Time as received from the satellites.
Fix Type	The type of GPS fix that has been acquired. Unknown - Unknown fix type. None - No fix achieved. 2D - 2 dimensional position. 3D - 3 dimensional position. DGPS - DGPS/SBAS aided 3D position. RTK Float - RTK with float ambiguities. RTK Fixed - RTK with fixed ambiguities.
Sats	The number of satellites that are detected by the GPS source.
Horz Acc	The horizontal accuracy of the GPS fix in meters.
Vert Acc	The vertical accuracy of the GPS fix in meters.
DOP	The dilution of precision of the GPS accuracy.

### Attitude The attitude status displays the current attitude of the 6X in the [earth reference frame](https://en.wikipedia.org/wiki/Earth-centered_inertial). {% hint style="info" %} The attitude information source is dependent on the selected configuration. See the [configuration ](/home/6x-series-sensors-user-guide/6x-series-sensors/configuration-and-settings/configuration.md)page for detailed information. {% endhint %} | Item | Information | | ----- | ----------------------------------------- | | Roll | The roll angle of the sensor in degrees. | | Pitch | The pitch angle of the sensor in degrees. | | Yaw | The yaw angle of the sensor in degrees. | *** ## Session Control Session Control displays if the 6X is ready to take imagery or not. If a session is started, the 6X is ready. If a session is not started automatically the 6X may not be ready. However, a session can be started manually if desired. ### Session control is displayed in 2 states: #### Session In Progress The 6X has detected that it is ready to begin collecting imagery. The session start criteria is based on the configuration of the 6X.

#### Start Session The 6X did not automatically start a session.

To start a session manually: 1. Name the session in the text input box, or leave the default web\_session name. 2. Press the Start Session button. 3. Verify the status lights on the 6X turn solid green. {% hint style="warning" %} Starting a session manually can be useful for ground testing. Starting a session manually before a flight is not recommended as the 6X may not have the telemetry information necessary for successful data capture. {% endhint %} *** ## Trigger Control The 6X can be manually triggered using the Capture Image button in the Trigger Control field. This is useful for ground testing, or when manual image capture is applicable.

Press the Capture Image button (a session must be started) and the 6X will take an image (1 image per imager). The status LEDs on the 6X will briefly flash from green to white. *** ## Calibration Control The Calibration Control field is used for capturing calibration images with a [reflectance panel](/home/6x-series-sensors-user-guide/reflectance-panel/introduction.md). The manual Capture Calibration button only needs to be used when: * No Light Sensor/GPS is being used. * The Light Sensor/GPS does not have the [push button feature](/home/6x-series-sensors-user-guide/incident-light-sensor-and-gps/anatomy.md#bottom).

Learn how to properly capture calibration images here: {% content-ref url="/pages/jtCrdJGsEP4hMiAm6xNs" %} [How To Use](/home/6x-series-sensors-user-guide/reflectance-panel/how-to-use.md) {% endcontent-ref %} --- # Agent Instructions This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com. ## Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter: ``` GET https://support.senterasensors.com/home/6x-series-sensors-user-guide/6x-series-sensors/configuration-and-settings/home.md?ask=&goal= ``` `ask` is the immediate question: it should be specific, self-contained, and written in natural language. `goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.