> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/6x-series-sensors-user-guide/6x-series-sensors/configuration-and-settings/how-to-access-web-page-user-interface/accessing-the-web-user-interface-on-the-freefly-hand-controller.md).

# Accessing the Web User Interface on The Freefly Hand Controller

{% stepper %}
{% step %}

### Power on Drone and Hand Controller 

{% endstep %}

{% step %}

### Navigate to the Home Page on your Hand Controller

<figure><img src="/files/2sCppg7jAMJplzNrJcwb" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Open the Application Menu

Click the grid icon in the lower right hand corner to open the Application Menu.

<figure><img src="/files/ZFHV4wFTXuM6N8EEewvf" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Open the Web Browser Application

Click the Chrome Icon to open a webpage.

<figure><img src="/files/GAPIlEBhe4O2jM0dbOKL" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Enter The Sensor's IP Address in the browser

To navigate to the Web User Interface, enter the IP address listed below, then press go.

```
192.168.144.141
```

<figure><img src="/files/vHjZPnpnKZExfPsLKG5A" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Web User Interface

From the home page you can check the status of the sensor, manually capture images, or navigate to other pages from the left hand side bar.

<figure><img src="/files/ZocawWwqZQBsXwFhttxQ" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}