# Adding 6X Sensors to DJI Pilot

## Instructions

1. Begin creating a mapping mission in DJI pilot
2. Open the Select Camera Model drop down<br>

   <figure><img src="/files/7AczxanhZPE94Ev7KueZ" alt=""><figcaption></figcaption></figure>
3. Press Create <br>

   <figure><img src="/files/wOBHVKmVXXs23Zvlrfk4" alt=""><figcaption></figcaption></figure>
4. Fill in the parameters as shown, then press Done<br>

   <figure><img src="/files/qMmqFyYAXpDzt2TMPSnd" alt=""><figcaption></figcaption></figure>
5. You will now be able to select the Sentera 6X from the custom camera list.&#x20;

{% hint style="info" %}
The parameters listed in step 4 will work for all 6X series variants.&#x20;
{% endhint %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://support.senterasensors.com/home/6x-series-sensors-user-guide/6x-series-sensors/installation/dji/adding-6x-sensors-to-dji-pilot.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.