> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/6x-series-sensors-user-guide/6x-series-sensors/installation/dji/dji-m400.md).
# DJI M400
6X Series Sensors Installation - DJI M400
### Before you begin
The 6X Sensor requires stand alone mode for use with the M400. In this mode the 6X uses GPS data from the light sensor/GPS module to determine when it should trigger the camera.
View the links below to learn about the Standard Operating Procedures for stand alone mode, and how to change overlap settings.
{% content-ref url="/pages/J8Y4iec0jBNIJju3tcAv" %}
[Stand Alone Mode (External GPS)](/home/6x-series-sensors-user-guide/6x-series-sensors/operation/standard-operating-procedure/stand-alone-mode-external-gps.md)
{% endcontent-ref %}
{% content-ref url="/pages/xdW5hlU4peNfQEtLr4SD" %}
[How To Change Overlap Settings](/home/6x-series-sensors-user-guide/6x-series-sensors/configuration-and-settings/configuration/how-to-change-overlap-settings.md)
{% endcontent-ref %}
***
## 6X & Light Sensor
### Instructions
1. Install light sensor/GPS into mounting tray.
2. Connect USB-C cable into light sensor.
3. Secure USB-C Cable in both cable clips.
4. Install 6X gimbal into Skyport.
5. Connect USB-C cable to gimbal.
6. Power On the aircraft.
{% hint style="warning" %}
The light sensor is connected to the USB-C port on the upper portion of the gimbal not the USB-C port on the sensor itself.
{% endhint %}
{% hint style="info" %}
If a light sensor is not bring used, simply omit the related steps.
{% endhint %}
***
## Light Sensor/GPS Mounting
If a Light Sensor/GPS was purchased with the 6X, the hardware to mount to the drone needs to be installed. See the instructions linked below.
{% content-ref url="/pages/7rjLkjEJxLaRyHbyiUaz" %}
[DJI M400](/home/6x-series-sensors-user-guide/incident-light-sensor-and-gps/installation/dji-m400.md)
{% endcontent-ref %}
***
## Adding 6X to DJI Pilot
{% content-ref url="/pages/KjW44wesX75KrchGt3az" %}
[Adding 6X Sensors to DJI Pilot](/home/6x-series-sensors-user-guide/6x-series-sensors/installation/dji/adding-6x-sensors-to-dji-pilot.md)
{% endcontent-ref %}
***
---
# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.
## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.
Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:
```
GET https://support.senterasensors.com/home/6x-series-sensors-user-guide/6x-series-sensors/installation/dji/dji-m400.md?ask=&goal=
```
`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
