> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/6x-series-sensors-user-guide/6x-series-sensors/installation/inspired-flight/inspired-flight-compatibility-settings.md).

# Inspired Flight Compatibility Settings

## Getting Started <a href="#getting-started" id="getting-started"></a>

IGC v1.3 and greater has automatic payload detection and parameter application, settings for 6X Series sensors. When prompted please apply the payload parameters when prompted by IGC.

<figure><img src="/files/q7vA6h2Hivz05tMnmiyg" alt="" width="563"><figcaption></figcaption></figure>

<figure><img src="/files/GiSg857u7c9r7KZOx8Ks" alt="" width="563"><figcaption></figcaption></figure>

## Setup Checklist <a href="#setup-checklist" id="setup-checklist"></a>

* [ ] Verify Sentera camera firmware is up to date.
* [ ] Verify IGC version is up to date.
* [ ] Complete the parameter setup instructions (only required for IGC V1.2.5 or earlier).

### Links <a href="#links" id="links"></a>

{% content-ref url="/pages/G17lW7qJHWdbfDzVonnv" %}
[Firmware Update](/home/6x-series-sensors-user-guide/6x-series-sensors/firmware-update.md)
{% endcontent-ref %}

{% embed url="<https://docs.inspiredflight.com/inspired-documentation/products/inspired-suite/inspired-ground-control-igc>" %}

{% content-ref url="/pages/EfGkbWtjPh7OVg1UI7u3" %}
[Parameter Setup](/home/6x-series-sensors-user-guide/6x-series-sensors/installation/inspired-flight/inspired-flight-compatibility-settings/parameter-setup.md)
{% endcontent-ref %}