> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/6x-series-sensors-user-guide/incident-light-sensor-and-gps/installation/dji-inspire-1-and-2.md).

# DJI Inspire 1 & 2

6X Series Sensors - Incident Light Sensor Installation - DJI Inspire 1 & 2

## Light Sensor/GPS Mount

1. Remove the 2 screws shown using a 2.5mm hex driver. 
2. Place mounting bracket onto the aircraft as shown. 
3. Reinstall the screws. 
4. Clean the top of the mounting bracket with an alcohol wipe and let dry. 
5. Remove the adhesive backing from the mounting tray and place onto the mounting bracket as shown. Press firmly into place.
6. Use the alcohol wipe to clean the side of the aircraft and let dry. 
7. Remove the adhesive back of the cable clip and attach to the side of the aircraft as shown. Press firmly into place.

{% hint style="info" %}
Install the equipment in the shown orientation. This allows the light sensor, cable, and gimbal to be connected safely and effectively. 
{% endhint %}

<figure><img src="https://816013970-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5Jgm6jwRCbkoXyPerUfI%2Fuploads%2FwfeZnnivrlo4Usr2qJaO%2FINSPIRE%20ILS%20%E2%80%91%20Made%20with%20FlexClip.gif?alt=media&amp;token=3e250d97-ca83-40a4-852d-68b188a43793" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://support.senterasensors.com/home/6x-series-sensors-user-guide/incident-light-sensor-and-gps/installation/dji-inspire-1-and-2.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.