# DJI M300/350

## Light Sensor/GPS Mount

1. Clean mounting bracket with alcohol wipe and let dry. 
2. Place mounting bracket onto the aircraft. The longer legs of the mounting bracket should be pointed towards the front of the aircraft. 
3. Use the provided screws to attach the bracket to the aircraft. 
4. Remove the adhesive backing from the mounting tray and place onto the mounting bracket as shown. Press firmly into place.
5. Use the alcohol wipe to clean the side of the aircraft and let dry. 
6. Remove the adhesive back of the cable clip and attach to the side of the aircraft as shown. Press firmly into place.

{% hint style="info" %}
Install the equipment in the shown orientation. This allows the light sensor, cable, and gimbal to be connected safely and effectively. 
{% endhint %}

<figure><img src="/files/NSHmvOWmIEJPBFbI6FdD" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://support.senterasensors.com/home/6x-series-sensors-user-guide/incident-light-sensor-and-gps/installation/dji-m300-350.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.