> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/6x-series-sensors-user-guide/quickstart-guide/installation.md).

# Installation

##  Getting Started 

Everything needed to install the 6X sensor and light sensor/GPS (optional) will be included in the case. This is the best place to start with a new 6X. 

It is recommended to install the 6X and related equipment onto the aircraft in a controlled environment like an office before your first flight to ensure that everything fits and powers on as expected. 

***

## Light Sensor/GPS Mount Installation

Use the provided mount(s), screws, and alcohol wipes to install the light sensor/GPS mounting hardware. 

<figure><img src="/files/NSHmvOWmIEJPBFbI6FdD" alt=""><figcaption></figcaption></figure>

### Detailed Mounting Hardware Installation Instructions

{% content-ref url="/pages/1eeDE7UYOAE3oUHwRGHH" %}
[Installation](/home/6x-series-sensors-user-guide/incident-light-sensor-and-gps/installation.md)
{% endcontent-ref %}

***

## 6X & Light Sensor Installation

1. Install the light sensor/GPS and 6X onto the aircraft.
2. Connect the USB-C to USB-C cable to the light sensor/GPS and the gimbal.&#x20;
3. Power on the aircraft.&#x20;

<figure><img src="/files/GBLnGuzer5ajrbzBnbTv" alt=""><figcaption></figcaption></figure>

### Detailed Sensor Installation Instructions

{% content-ref url="/pages/1VP34Vg0NgWDVx0Vg9yX" %}
[Installation](/home/6x-series-sensors-user-guide/6x-series-sensors/installation.md)
{% endcontent-ref %}

***