> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/6x-series-sensors-user-guide/quickstart-guide/setup.md).

# Setup

## New 6X Sensors

Brand new 6X sensors should come pre-configured for the aircraft/installation that it is expected to be used with. This information is provided when the 6X is purchased from Sentera. 

This means that the camera configuration should not need to be changed. 

## Used 6X Sensors

If a 6X has been used before and the configuration is unknown the camera configuration should be verified and changed as required. 

{% content-ref url="/pages/s5f5EzSwV5rr3n4KaWUW" %}
[Configuration](/home/6x-series-sensors-user-guide/6x-series-sensors/configuration-and-settings/configuration.md)
{% endcontent-ref %}

The most common configurations are:

| Config                  | Compatible Aircraft                  |
| ----------------------- | ------------------------------------ |
| Gimballed - DJI Skyport | <p>DJI M300/350<br>DJI M200/210</p>  |
| Astro                   | Freefly Astro                        |
| Alta X Gen II           | Freefly Alta X Gen II                |
| IF800                   | Inspired Flight IF800                |
| IF1200                  | Inspired Flight IF1200               |
| Gimballed - Sentera GPS | <p>DJI Inspire 1 & 2<br>DJI M100</p> |

***