Astro Extended Landing Gear Installation

Installation

1. Turn over drone.

2. Unscrew and remove the four standard Astro Leg Mounts.

3. Attach the first Sentera Leg Mount. Secure it by screwing in the two top screws and four side screws.

4. Attach and secure the second Sentera Leg Mount.

5. Insert the Legs into the Mounts and secure each latch.

Both Sentera Leg Mounts can be used on either side of the Astro Drone.

1. Turn over drone

Turn over the drone and begin unscrewing the four legs.

2. Remove screws

Remove both screws from each leg mount.

3. Attach the first leg mount

Add the new Sentera Leg mount to the side of the Astro. Begin screwing in the two top screws and four side screws.

4. Attach the second leg mount

Add the second Sentera leg mount to the other side of the Astro. Begin screwing in the two top screws and four side screws.

5. Inserting The Legs

Insert the new Sentera legs into the mounts and secure each latch.

6. Storing the Legs

Remove the legs from the leg mounts and store in your case as shown. Then place the Astro on top of the legs in the case.