For the complete documentation index, see llms.txt. Markdown versions of documentation pages are available by appending .md to page URLs.
Skip to content

Satellite imagery

Add Sentinel-2 satellite layers to any field and use them to watch the crop between drone flights. Satellite imagery is included in every plan.

Every field in FieldAgent gets satellite scenes every few days, all season long, with no flight or order. They come from the Sentinel-2 constellation, operated by the European Space Agency. Use them to decide where to fly or walk next. At 10 meters per pixel, they're far coarser than drone imagery.


Add a satellite layer

1

Open Add Map Layers

Open the field and click the layers icon layers icon in Map Layers.

2

Turn on Satellite

In Add Map Layers, turn on the Satellite toggle button. Turn off Surveys to see only satellite dates.

3

Choose a date and layer

Pick a date with a high percentage beside the sun icon sun icon. The percentage shows how clear the sky was.

Each date lists an NDVI, an NDRE and an RGB layer. Click the circle next to a layer to show it.

Add Map Layers with the Satellite toggle button on, listing two scenes dated 08-28-2026 at 43 and 80 percent and one dated 08-26-2026 at 100 percent, each with NDVI (Red, NIR), NDRE (Red Edge, NIR), and RGB (Red, Green, Blue) layers
4

Return to the field

Click the back arrow back icon to return to the field view.

Try it in the demo

Try it on a field with nine satellite dates from the 2026 season. List only the satellite dates and add the NDVI of the newest one.

Open this demo full size


Read a satellite layer

Click the layer name in Map Layers to open its details. They give the Cloud Cover of the scene and the same Colorization controls as a drone layer.

A Sentinel-2 NDVI layer over the field with the details panel showing Date 08-26-2026, Bands Red and NIR, Ground Sample Distance 10 m/pix, Cloud Cover 0 percent, and the Colorization panel set to By Range

The layer is clipped to the field boundary, so the histogram and the zone statistics describe only the field.

With 10 m pixels, the color classes come out as broad bands.

The demo field under a Sentinel-2 NDRE scene: banded yellow, orange and red classes

Satellite layers work with the same display tools as drone layers. You can stack, reorder and hide them, and change their Opacity.

Try it in the demo

In the demo below, a satellite NDVI with a low east half is on the map. Open its details, then check the low patch against the RGB from the same date.

Open this demo full size


Watch the field between flights

  • Add the most recent clear NDVI scene each week. A field that's greening up evenly needs no visit. An area that falls behind is where to fly or walk.

  • Track the season with By Range colorization and the field-boundary Average in Zone Statistics. The same layer type across dates shows the crop's development and, late in the season, its dry-down.

  • Draw zones over hybrids or practices, and compare their averages on a clear scene.

  • Turn an NDVI or NDRE scene into rate zones with Zone Rx (Beta), under Display Mode.


Map layersColorization and visualizationCrop Health and Multispectral mosaicsZones and zone statistics

Last updated

Was this helpful?