# Propeller

## Before you begin

Upload your AeroPoint data before PPK processing. View the link below for instructions on uploading to your user portal.

{% embed url="<https://help.propelleraero.com/hc/en-us/articles/19383353840279-How-Do-I-Upload-AeroPoint-Data-to-My-User-Portal>" %}

## Processing

{% stepper %}
{% step %}

### Open Propeller

Select Data Processing from the top bar.

<figure><img src="/files/aPBzwsohhPMc0T8y0QTS" alt=""><figcaption></figcaption></figure>

Then select Upload New Survey from the drop down menu.

<figure><img src="/files/Jk9bGZmVb8prkfFrMZxC" alt="" width="375"><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Upload Files

Choose the site associated with your files, or create a new site.

<figure><img src="/files/1p4u8qOyxWoDNxvSyC3G" alt=""><figcaption></figcaption></figure>

Select Photogrammetry survey processing, then click next.

<figure><img src="/files/mZzQWQREvyQS2CybZzpk" alt=""><figcaption></figcaption></figure>

Select Use Propeller PPK, then click next

<figure><img src="/files/crulfIA6BXwX93Pltbzg" alt=""><figcaption></figcaption></figure>

Add the .UBX and .MRK files from your sensor's session folder.

<figure><img src="/files/8QrpRl7EZoY6zL1oXJDD" alt=""><figcaption></figcaption></figure>

Then select and add each image from the rgb folder in your sensor's session folder.

<figure><img src="/files/4QLh3bKSSWv2tMNVqiZy" alt=""><figcaption></figcaption></figure>

Uploaded files are listed on the left hand side, and the photo dots populate on the map.

<figure><img src="/files/6VDUW7aBpzYCQZW5EI9t" alt=""><figcaption></figcaption></figure>

Ensure your files passed validation checks, then click next.

<figure><img src="/files/j8ZqvSupVsufiLnDVR42" alt=""><figcaption></figcaption></figure>

Adjust your survey name and date, if desired, then click next.

<figure><img src="/files/hl5CnevBijhxcgfZwmoR" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Select AeroPoints

Choose the AeroPoints associated with your data. If &#x20;

<figure><img src="/files/hekgoqCuPw513eAOgrtR" alt=""><figcaption></figcaption></figure>

Select Propeller Correction Network, then click save.

<figure><img src="/files/xQfZtzrALrnb5t2Aufko" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Select Outputs

Select no filter, then click next.

<figure><img src="/files/uk9JyhsOwF0Yd7rv3ryS" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Begin Processing

Review the details of your upload.

<figure><img src="/files/LLTeUtYy9hP2c8GWb6ey" alt=""><figcaption></figcaption></figure>

Select a QA level or toggle it off. Then click Submit Survey for Processing.&#x20;

<figure><img src="/files/ZxT0mKu8kK2LlCxMnAom" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://support.senterasensors.com/home/rtk-ppk-module/data-processing/ppk-processing/propeller.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.