**Use a USB cable, that is compatible with your base station, to connect to the USB-C port on the Sentera Ground Radio.
***If you are connecting your laptop to your base station via USB cable, use a cable which is compatible with both devices.
Additional equipment for 6X Sensor Operations
6X Dual Mount
Right Angle USB-C to USB-A Cable, 6in
Light Sensor
Instructions
1
Setup Base Station
Set the base station up in a location with a clear view of the sky.
Do not place under or directly next to:
Trees
Buildings
Large metal objects
Tailgates
2
Power On
Hold the power button to turn the base station on.
3
Survey Location
Select whether to use Self-Survey or Known Location for the survey location, then update the reference position.
4
Verify Status
Verify the status of the base station in its application or web interface
5
Verify Logging (PPK ONLY)
Verify in the base station's application or web interface that the base station is logging PPK data.
6
Verify Antenna is mounted (RTK ONLY)
Verify that the Antenna is mounted on the drone.
7
Verify Radio Connection (RTK ONLY)
Verify that the Antenna is mounted on the drone, and the Sentera ground radio RSSI status lights are either scrolling green (searching for air radio) or solid green (connected to air radio).
