Accessing the user interface on the Herelink hand controller in flight will trigger the lost comms / RC time out failsafe. It is recommended to only use feature this while not in flight.
When using the NTRIP client via IGC on the Herelink, navigating to this user interface will prevent the RTCM corrections message from being forwarded to the aircraft and the RTK solution may dropout until IGC is reopened.
1
Assemble & Power On
Ensure your 6X Sensor, aircraft, RTK/PPK Module, and hand controller are assembled, powered, and fully booted.
2
Open WebView Browser Tester (No Internet Required)
Open the web browser on the hand controller.
Type 192.168.144.141 in the address bar and press enter/go.
The user interface will appear.
65R Sensor Web Page
How To Access via GS-ONE Hand Controller
1
Assemble & Power On
Ensure your 6X Sensor, aircraft, RTK/PPK Module, and hand controller are assembled, powered, and fully booted.
2
Open Chrome (No Internet Required)
From the home screen on the hand controller open Google Chrome.
Type 192.168.144.141 in the address bar and press enter/go.
