> For the complete documentation index, see [llms.txt](https://support.senterasensors.com/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.senterasensors.com/home/rtk-ppk-module/setup-and-installation/base-stations/trimble-base-stations/trimble-r980/rtk-setup.md).

# RTK Setup

## Software Setup for RTK

{% stepper %}
{% step %}

### Connect Device to R980 via Wi-Fi

For documentation on connecting to the base station click this link

{% embed url="<https://help.fieldsystems.trimble.com/r980/initial-setup-8-connect-to-web-interface-r980.htm>" %}
{% endstep %}

{% step %}

### Configure I/O Settings

Once your are connected to the Base Station in the web interface, click the I/O Configuration Tab on the left hand side bar.&#x20;

<figure><img src="https://880432523-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZVOsw5zLqTIEr4ErRyeO%2Fuploads%2FKuKam4F9AHkFYedqIPxr%2FHomescreen%20-%20Click%20on%20IO%20Configuration%20Tab.png?alt=media&amp;token=5d47ac47-cc4a-43b5-91f9-db5ea79bf1ad" alt=""><figcaption></figcaption></figure>

Click on the second Serial in the Type column. Verify that it is the Ext-Serial Port and not the Lemo Port.

<figure><img src="https://880432523-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZVOsw5zLqTIEr4ErRyeO%2Fuploads%2FXNvhdxXuUrnCNDSQaw7w%2FIO%20Configuration%20detected%20serial%20-%20Click%20on%20Serial%20Button.png?alt=media&amp;token=1a506030-ad80-457e-af50-1f7e06f95b58" alt=""><figcaption></figcaption></figure>

Update I/O Configuration Settings to match the image below.

<figure><img src="https://880432523-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZVOsw5zLqTIEr4ErRyeO%2Fuploads%2FaRiISuZ5boGOwLCNy3Aj%2FIO%20Configuration%20Page%20for%20Serial%20Ext%20Serial.png?alt=media&amp;token=99819b47-e92d-4373-ab7c-8a85522e5d45" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}

***

## Hardware Setup

{% stepper %}
{% step %}

### Mount The R980

Mount the R980 base station to a survey pole or tripod.&#x20;

<figure><img src="https://880432523-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZVOsw5zLqTIEr4ErRyeO%2Fuploads%2FSHuyKvGWcFiXY5L1xzRq%2FIMG_4929.jpg?alt=media&amp;token=488b494b-c27c-48e4-aeb1-f5f4bde99b3f" alt="" width="375"><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### Connect Ground Radio

Connect the Sentera ground radio to the R980 using the Limo to USB cable.&#x20;

First open the black rubber tab with the USB symbol on it

<figure><img src="https://880432523-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZVOsw5zLqTIEr4ErRyeO%2Fuploads%2F0HLA47aDxROJp7MRd6hm%2FIMG_4946.jpg?alt=media&amp;token=e15e7c65-f3b8-409f-be65-dc47376dc6aa" alt="" width="375"><figcaption></figcaption></figure>

{% hint style="info" %}
The Serial Port for USB communication can be identified by the yellow ring around it
{% endhint %}

Then insert the Lemo to USB Cable adapter, and connect a USB-a to USB-c cable.

<figure><img src="https://880432523-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZVOsw5zLqTIEr4ErRyeO%2Fuploads%2FpSOIaJI3WlQhhm7XxroN%2FIMG_4933.jpg?alt=media&amp;token=ec0922bb-1cd6-40c8-b78a-913966df6439" alt="" width="375"><figcaption></figcaption></figure>

Attach the USB-c cable to the Sentera Ground Radio

<figure><img src="https://880432523-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZVOsw5zLqTIEr4ErRyeO%2Fuploads%2FZhpMmWDnhFfnhzefD9n5%2FIMG_4930.jpg?alt=media&amp;token=0759c9e7-d9dd-4abf-9380-c9228b3a4b8f" alt="" width="375"><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Place The Radio

Place the Sentera ground radio such that the antenna is pointed towards the sky.&#x20;

The Sentera ground radio has an integrated magnet and a 1/4"-20 thread mount that can be utilized for mounting as the end user sees fit.&#x20;
{% endstep %}

{% step %}

### Verify the Antenna is Mounted on the Drone&#x20;

Install the Antenna per the manufacturer instruction
{% endstep %}
{% endstepper %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://support.senterasensors.com/home/rtk-ppk-module/setup-and-installation/base-stations/trimble-base-stations/trimble-r980/rtk-setup.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
