Mavic 3 Multispectral

Learn how to capture Reflectance Panel Imagery with the Mavic 3 Multispectral drone.

Before Starting

Reflectance panel images should be captured immediately before and/or after drone survey data collection.

---

Instructions

1. Power on the drone and remote controller.

2. Place the reflectance panel in an open and unobstructed area.

3. Open the DJI Pilot 2 App on the remote controller.

4. Press the Camera View Button.

5. Verify Settings and Change as needed.

   1. Set the focus to AFS (Auto Focus Single). The Drone may be set to MF or AFC mode. Tap the letters to switch between focus modes.

   2. Set the zoom to 1.0X

   

   Settings for Calibration Photo Capture
6. Pick up aircraft and hold at waist height over calibration panel.

   • Ensure aircraft is not shadowing the reflectance panel.

   • Ensure the light sensor is not shadowed by your body.

     
7. Press the image capture button on the remote controller to take the calibration photo.

8. Set down the aircraft and pick up the panel.