Inspired Flight
Last updated
Last updated
To ensure the gimbal steering for the 65R will work for Inspired Flight aircraft two things need to be checked:
Verify that the 65R is on firmware version 3.13.1 or higher
Verify that the Inspired Flight compatibility parameters are set on the aircraft
To manually control the gimbal use the rocker wheel on the left hand side of the herelink controller.
Pushing the wheel to the right will point the gimbal downwards (NADIR).
Pushing the wheel to the left will point the gimbal forward.
To set a gimbal angle for a mapping mission do the following:
Navigate to the Plan screen
Select Survey (or other mission type)
Select the Waypoint option from the left hand menu
Place a waypoint into the flight plan
In the waypoint mission item on the right hand side of the screen select the camera drop down menu.
Check the gimbal options box, then enter your desired gimbal pitch angle.
Then plan the rest of your flight as normal. The gimbal will change the pitch angle of the sensor at the waypoint and remain at that pitch angle throughout the rest of the mission. to add additional gimbal pitch changes use the same method between survey mission items, or plan a waypoint mission and add the gimbal change commands as desired.