USB Out

This page describes how to configure a generic base station with a USB output.

Software Setup for RTK

Set the Base Station output to Serial/USB.

Set the baud rate to 115200.

Set the corrections message type to be RTCM3 or greater.

Verify the Format is set to RINEX 3.03.

If available, enable auto logging on your base station .

Mount the base station to a survey pole or tripod.

This step is only required when operating with RTK.

Connect the Sentera ground radio to the Base Station using a USB-A or USB-C to USB-C Cable.

This step is only required when operating with RTK.

Place the Sentera ground radio such that the antenna is pointed towards the sky.

The Sentera ground radio has an integrated magnet and a 1/4"-20 thread mount that can be utilized for mounting as the end user sees fit.

This step is only required when operating with RTK.

Install the Antenna per the manufacturer instruction

Last updated 3 days ago