DJI M300/350

6X Series Sensors - Incident Light Sensor Installation - DJI M300/350

Light Sensor/GPS Mount

1. Clean mounting bracket with alcohol wipe and let dry.

2. Place mounting bracket onto the aircraft. The longer legs of the mounting bracket should be pointed towards the front of the aircraft.

3. Use the provided screws to attach the bracket to the aircraft.

4. Remove the adhesive backing from the mounting tray and place onto the mounting bracket as shown. Press firmly into place.

5. Use the alcohol wipe to clean the side of the aircraft and let dry.

6. Remove the adhesive back of the cable clip and attach to the side of the aircraft as shown. Press firmly into place.

Install the equipment in the shown orientation. This allows the light sensor, cable, and gimbal to be connected safely and effectively.